Файл bsp_board_EA_v1_1.h

См. исходные тексты.

Макросы
#define	bsp_board_EA_v1_1   1
#define	BSP_BOARD_HAS_CAN   1
	board has CAN as IRDA
#define	BSP_BOARD_HAS_ETHERNET   1
	board has ETHERNET
#define	BSP_BOARD_HAS_I2C   1
#define	BSP_BOARD_HAS_I2C_PCA9532   1
#define	BSP_BOARD_HAS_MMC   1
#define	BSP_BOARD_HAS_SD   1
#define	BSP_BOARD_HAS_SPI   1
#define	BSP_BOARD_HAS_SPI_TSC2046   1
#define	BSP_BOARD_HAS_UART0   1
	board has UART0
#define	BSP_BOARD_HAS_UART1   1
	board has UART1
#define	BSP_BOARD_HAS_UART2   1
	board has UART3 as IRDA
#define	BSP_BOARD_HAS_USB   1
	board has USB
#define	BSP_BOARD_HAS_USB_DEVICE   0
	board has USB DEVICE on USB1
#define	BSP_BOARD_HAS_USB_HOST   2
	board has USB HOST on USB2
#define	BSP_BOARD_HAS_USB_OTG   1
	board has OTG USB on USB1
#define	BSP_USB_MODE_DEFINED
#define	CCLKCFG_Val   3
#define	CLKSRCSEL_Val   CLKSRCSEL_XTAL
#define	CS_TSC2046   1
#define	i_ARCH   ARM7
#define	i_BOARD   EA_v1_1
#define	i_MCU_FAMILY   LPC2xxx
#define	i_MCU_MODEL   2478
#define	i_VENDOR   EA
#define	i_VERSION   0x010100
#define	LPC2xxx_CLOCK_SETUP   1
#define	LPC2xxx_FLASH_SETUP   1
	Enabling MAM.
#define	LPC2xxx_PLL_SETUP   1
#define	LPC2xxx_SDRAM_SETUP   BSP_BOARD_HAS_SDRAM
#define	LPC2xxx_VIC_SETUP   1
#define	MAMCR_Val   LPC_SC_MAM_MODE_FULL
#define	P0_20_TP_CS   PORT_PIN_NUMBER(LPC2XXX_PORT0,20)
#define	PCA_LED1   8
#define	PCA_LED2   9
#define	PCA_LED3   10
#define	PCA_LED4   11
#define	PCA_LED5   12
#define	PCA_LED6   14
#define	PCA_LED7   15
#define	PCA_LEDCD   5
#define	PCA_LEDnWP   4
#define	PCLKSEL0_Val   (LPC2XXX_PCLK_V(WDT,4) | LPC2XXX_PCLK_V(TIMER0,1))
#define	PCLKSEL1_Val   (LPC2XXX_PCLK_V(BAT_RAM,4) | LPC2XXX_PCLK_V(SYSCON,4))
#define	PCONP_Val
#define	PLL_MValue   11
#define	PLL_NValue   0
#define	port_spi_chip_disselect(chip_num)   PORT_SET_PIN (P0_20_TP_CS)
#define	port_spi_chip_select(chip_num)   PORT_CLEAR_PIN (P0_20_TP_CS)
#define	port_spi_chip_select_init()
#define	USBCLKCFG_Val   5
#define	XTAL_HZ   12000000UL