gcc_arm_generic_flash.ld

Go to the documentation of this file.

/*
Common part of the linker scripts for STM32 devices
Copyright RAISONANCE S.A.S. 2008

Modifed by Dimirtos
*/

/* include the common STM32F10x sub-script */
ENTRY(Reset_Handler)
/* Sections Definitions */
SECTIONS
{
    /* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */
    .isr_vector :
    {
        . = ALIGN(4);
        KEEP(*(.isr_vector))            /* Startup code */
        . = ALIGN(4);
    } >FLASH

    /* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */
    .flashtext :
    {
        . = ALIGN(4);
        *(.flashtext)            /* Startup code */
        . = ALIGN(4);
    } >FLASH


    /* the program code is stored in the .text section, which goes to Flash */
    .text :
    {
            . = ALIGN(4);

        *(.text)                   /* remaining code */
        *(.text.*)                   /* remaining code */
        *(.rodata)                 /* read-only data (constants) */
        *(.rodata*)
        *(.glue_7)
        *(.glue_7t)

            . = ALIGN(4);
         _etext = .;
            /* This is used by the startup in order to initialize the .data secion */
         _sidata = _etext;
    } >FLASH



    /* This is the initialized data section
    The program executes knowing that the data is in the RAM
    but the loader puts the initial values in the FLASH (inidata).
    It is one task of the startup to copy the initial values from FLASH to RAM. */
    .data  : AT ( _sidata )
    {
            . = ALIGN(4);
        /* This is used by the startup in order to initialize the .data secion */
        _sdata = . ;

        *(.data)
        *(.data.*)

            . = ALIGN(4);
            /* This is used by the startup in order to initialize the .data secion */
         _edata = . ;
    } >RAM



    /* This is the uninitialized data section */
    .bss :
    {
            . = ALIGN(4);
        /* This is used by the startup in order to initialize the .bss secion */
        _sbss = .;

        *(.bss)
        *(.bss.*)
        *(COMMON)

            . = ALIGN(4);
            /* This is used by the startup in order to initialize the .bss secion */
         _ebss = . ;
    } >RAM

    PROVIDE ( end = _ebss );
    PROVIDE ( _end = _ebss );


        /* .stack_dummy section doesn't contains any symbols. It is only
         * used for linker to calculate size of stack sections, and assign
         * values to stack symbols later */
        .stack_dummy :
        {
                *(.stack)
        } > RAM

        /* Set stack top to end of RAM, and stack limit move down by
         * size of stack_dummy section */
        _estack = ORIGIN(RAM) + LENGTH(RAM);
        _sstack = _estack - SIZEOF(.stack_dummy);
        PROVIDE(__stack = _estack);


    /* after that it's only debugging information. */

    /* remove the debugging information from the standard libraries */
    DISCARD :
    {
     libc.a ( * )
     libm.a ( * )
     libgcc.a ( * )
     }

    /* Stabs debugging sections.  */
    .stab          0 : { *(.stab) }
    .stabstr       0 : { *(.stabstr) }
    .stab.excl     0 : { *(.stab.excl) }
    .stab.exclstr  0 : { *(.stab.exclstr) }
    .stab.index    0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
    .comment       0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
    /* DWARF 1 */
    .debug          0 : { *(.debug) }
    .line           0 : { *(.line) }
    /* GNU DWARF 1 extensions */
    .debug_srcinfo  0 : { *(.debug_srcinfo) }
    .debug_sfnames  0 : { *(.debug_sfnames) }
    /* DWARF 1.1 and DWARF 2 */
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
}