lpc2xxx_pconp.h

См. документацию.

/*
 *  CMSIS2000
 *  CMSIS-like sources for LPC2xxx series MCUs
 *
 *  (C) Copyright 2011-2012, Dmitriy Cherepanov, All Rights Reserved
 *
 *  Version: 0.0.7
 *  Date of the Last Update:  2013-03-04
 *  
 *  Permission is hereby granted, free of charge, to any person obtaining a copy
 *  of this software and associated documentation files (the "Software"), to
 *  deal in the Software without restriction, including without limitation the
 *  rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
 *  sell copies of the Software, and to permit persons to whom the Software is
 *  furnished to do so, subject to the following conditions:
 *
 *  The above copyright notice and this permission notice shall be included in
 *  all copies or substantial portions of the Software.
 *
 *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 *  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 *  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 *  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *  FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 *  IN THE SOFTWARE.
 *
 *  Do not be lasy! For the latest version see http://irtos.sourceforge.net .
 *
 *  
#*/

#ifndef _PORT_LPC2XXX_PCONP_H_
#define _PORT_LPC2XXX_PCONP_H_ 1
/*-----------Документация Doxygen  --  Doxygen documentation -----------------*/
/** \file
 *\if russian_lng
 *      Маски  периферийных устройств в LPC для PCONP
 *\else
 *      peripheries masks for PCONP
 *\endif
 * \ingroup LPC2xxx_System_periphiral
 *  @{
 */

#if _HASBSPBRD > 0
#include "bsp_board_def.h"/* board /definitions if you do not have this file then create it with '#include "mcu_id.h"' line*/
#else
        #include "mcu_id.h"
#endif
#if ((i_MCU_MODEL > 2300) || ((i_MCU_MODEL > 1700) && (i_MCU_MODEL < 1900)))
/*------ LPC peripheral numbers ----------------------------------------------*/

#define PCTIMER0        (1<<1) /**< mask for TIMER0.*/
#define PCTIMER1        (1<<2) /**< mask for TIMER1. */
#define PCUART0         (1<<3) /**< mask for UART0. */
#define PCUART1         (1<<4) /**< mask for UART1. */
#define PCPWM0          (1<<5) /**< mask for PWM0. */
#define PCPWM1          (1<<6) /**< mask for PWM1 */
#define PCI2C0          (1<<7) /**< mask for I2C0. */
#define PCSPI           (1<<8) /**< mask for SPI */
#define PCRTC           (1<<9) /**< mask for RTC. */
#define PCSSP1          (1<<10) /**< mask for SSP1. */
#define PCDAC           (1<<11) /**< mask for DAC. */
#define PCADC           (1<<12) /**< mask for ADC. */
#define PCADC0          (1<<12) /**< mask for ADC.0 */
#define PCCAN1          (1<<13) /**< mask for CAN1.*/
#define PCCAN2          (1<<14) /**< mask for CAN2. */
#define PCACF           (1<<15) /**< mask for CAN filtering.*/

#define PCGPIO          (1<<15) /**< mask for PCGPIO .*/
#define PCRIT           (1<<16) /**< mask for PCRIT Repetitive Interrupt Timer power/clock control bit*/
#define PCMCPWM         (1<<17) /**< mask for Motor Control PWM.*/
#define PCQEI           (1<<18) /**< mask for the  Quadrature Encoder Interface power/clock control bit. */
#define PCI2C1          (1<<19) /**< mask for I2C1. */
#define PCLCD           (1<<20) /**< mask for LCD. */
#define PCADC1          (1<<20)
#define PCSSP0          (1<<21) /**< mask for SSP0. */
#define PCTIMER2        (1<<22) /**< mask for TIMER2 */
#define PCTIMER3        (1<<23) /**< mask for TIMER3. */
#define PCUART2         (1<<24)/**< mask for UART2 */
#define PCUART3         (1<<25)/**< mask for UART3. */
#define PCI2C2          (1<<26)/**< mask for I2C2. */
#define PCI2S           (1<<27)/**< mask for I2S. */
#define PCMCI           (1<<28)/**< mask for MCI. */
#define PCGPDMA         (1<<29)
#define PCENET          (1<<30)
#define PCUSB           (1<<31)/**< mask for USB */
/*----------------------------------------------------------------------------*/

/** \brief TURN ON PERIPHIRAL MODULE in NXP controller
 */
#define  PORT_LPC2XXX_PWR_CONTRL_ON(_lpc_periph)        LPC_SC->PCONP = LPC_SC->PCONP | (PC##_lpc_periph)
#define  PORT_LPC2XXX_PWR_CONTRL_OFF(_lpc_periph)       LPC_SC->PCONP = LPC_SC->PCONP & (~(PC##_lpc_periph))


#endif
/** @} end of group LPC2xxx_System_periphiral */
#endif  /* _PORT_LPC2XXX_PCONP_H_ */