nxp_base_addresses.h

См. документацию.

/*
 *  CMSIS2000
 *  CMSIS-like sources for LPC2xxx series MCUs
 *
 *  (C) Copyright 2011-2012, Dmitriy Cherepanov, All Rights Reserved
 *
 *  Version: 0.0.7
 *  Date of the Last Update:  2013-03-04
 *  
 *  Permission is hereby granted, free of charge, to any person obtaining a copy
 *  of this software and associated documentation files (the "Software"), to
 *  deal in the Software without restriction, including without limitation the
 *  rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
 *  sell copies of the Software, and to permit persons to whom the Software is
 *  furnished to do so, subject to the following conditions:
 *
 *  The above copyright notice and this permission notice shall be included in
 *  all copies or substantial portions of the Software.
 *
 *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 *  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 *  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 *  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *  FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 *  IN THE SOFTWARE.
 *
 *  Do not be lasy! For the latest version see http://irtos.sourceforge.net .
 *
 *  
#*/


#ifndef _ARCH_ARM_NXP_BASE_ADDRESSES_H_
#define _ARCH_ARM_NXP_BASE_ADDRESSES_H_ 1
/*-----------Документация Doxygen  --  Doxygen documentation -----------------*/
/** \file
 *\if russian_lng
 *      Базовые Адреса перефирийных устройств в NXP
 *\else
 *      APB(ARM Peripheral Bus) peripheries base addresses
 *\endif
 *      \author Dmitriy Cherepanov
 *      \date 2010
 * \ingroup base_addresses_LPC2000
 *
 */
/*---------------------------------------------------------------------------*/
/** \ingroup    LPC2xxx_System
 *\if russian_lng
 *      \defgroup base_addresses_LPC2000 Базовые Адреса перефирийных устройств в NXP
 *\else
 *      \defgroup base_addresses_LPC2000 APB(ARM Peripheral Bus) peripheries base addresses
 *\endif
 * \addtogroup base_addresses_LPC2000
 *  @{
 */
/*------ МАКРОСЫ И ОПРЕДЕЛЕНИЯ - MACROSES ------------------------------------*/
/**\brief System Control Block(SCB) base address.
 *
 * module includes Memory Accelerator Module,
 * Phase Locked Loop, VPB divider, Power Control, External Interrupt,
 * Reset, and Code Security/Debugging
 */
#define LPC_SC_BASE             0xE01FC000
/**-------------SYSTEM --------------------------------------------------------*/
/** Vectored Interrupt Controller (VIC)  base address*/
#define VIC_BASE                0xFFFFF000
/** Pin Connect Block base address */
#define LPC_PINSEL_BASE         0xE002C000
/** General Purpose Input/Output (GPIO) */
#define LPC_GPIO_BASE           0xE0028000
/** Fast I/O setup base address */
#define LPC_FIO_BASE            0x3FFFC000
#define LPC_GPIO0_BASE        (LPC_FIO_BASE + 0x00000)
#define LPC_GPIO1_BASE        (LPC_FIO_BASE + 0x00020)
#define LPC_GPIO2_BASE        (LPC_FIO_BASE + 0x00040)
#define LPC_GPIO3_BASE        (LPC_FIO_BASE + 0x00060)
#define LPC_GPIO4_BASE        (LPC_FIO_BASE + 0x00080)

#define LPC_GPIOINT_BASE 0xE0028080

/** External Memory Controller (EMC) base address */
#define LPC_EMC_BASE            0xFFE08000

/*-------------TIMERS---------------------------------------------------------*/
/** Timer 0 base address */
#define LPC_TIM0_BASE                   0xE0004000
/** Timer 1 base address */
#define LPC_TIM1_BASE                   0xE0008000
/** Timer 2 base address */
#define LPC_TIM2_BASE                   0xE0070000
/** Timer 3 base address */
#define LPC_TIM3_BASE                   0xE0074000

/** Pulse Width Modulator (PWM) base address */
#define LPC_PWM0_BASE           0xE0014000
#define LPC_PWM1_BASE           0xE0018000

/** Real Time Clock base address */
#define LPC_RTC_BASE            0xE0024000
/** Watchdog base address */
#define LPC_WDG_BASE            0xE0000000
#define LPC_WDT_BASE            LPC_WDG_BASE
/*-----SERIAL INTERFASES------------------------------------------------------*/
/** Universal Asynchronous Receiver Transmitter 0 (UART0) base address */
#define LPC_UART0_BASE          0xE000C000
/** Universal Asynchronous Receiver Transmitter 1 (UART1) base address */
#define LPC_UART1_BASE          0xE0010000
/** Universal Asynchronous Receiver Transmitter 2 (UART2) base address */
#define LPC_UART2_BASE          0xE0078000
/** Universal Asynchronous Receiver Transmitter 3 (UART3) base address */
#define LPC_UART3_BASE          0xE007C000

/** I2C Interface 0 base address */
#define LPC_I2C0_BASE           0xE001C000
/** I2C Interface 1 base address */
#define LPC_I2C1_BASE           0xE005C000
/** I2C Interface 2 base address */
#define LPC_I2C2_BASE           0xE0080000

/** SPI0 (Serial Peripheral Interface 0) base address */
#define LPC_SPI0_BASE           0xE0020000
/** SSP0 Controller base address */
#define LPC_SSP0_BASE           0xE0068000
/** SSP1 Controller base address */
#define LPC_SSP1_BASE           0xE0030000


/*-------------- ADC DAC    --------------------------------------------------*/
/** A/D Converter 0 (AD0) base address */
#define LPC_AD0_BASE            0xE0034000
/** D/A Converter base address */
#define LPC_DAC_BASE            0xE006C000
/*-------------- CAN controllers ---------------------------------------------*/
/** CAN CONTROLLERS AND ACCEPTANCE FILTER base address */
#define LPC_CAN_ACCEPT_BASE     0xE003C000
#define LPC_CAN_CENTRAL_BASE    0xE0040000
#define LPC_CAN1_BASE           0xE0044000
#define LPC_CAN2_BASE           0xE0048000

/*-------------- BLOCK DEVICES -----------------------------------------------*/
/** MultiMedia Card Interface(MCI) Controller base address */
#define LPC_MCI_BASE            0xE008C000
/** I2S Interface Controller (I2S) base address */
#define LPC_I2S_BASE            0xE0088000
/** General-purpose DMA Controller base address */
#define LPC_GPDMA_BASE          0xFFE04000

/** General-purpose DMA Controller channel 0 base address */
#define LPC_GPDMACH0_BASE               0xFFE04100
/** General-purpose DMA Controller channel 1 base address */
#define LPC_GPDMACH1_BASE               0xFFE04120
/*-------------- USB OTG and etc ---------------------------------------------*/
/** USB Controller base address */
#define LPC_USB_INT_BASE                0xE01FC1C0
#define LPC_USB_BASE            0xFFE0C200
/** USB Host Controller and OTG registers base address */
#define LPC_USBHC_BASE          0xFFE0C000 /*  for LPC24xx only  */
/** USB OTG Controller base address */
#define LPC_USBOTG_BASE         0xFFE0C100
#define LPC_USBOTG_I2C_BASE             0xFFE0C300
#define LPC_USBOTG_CLK_BASE             0xFFE0CFF0
/*-------------- Ethernet        ---------------------------------------------*/
/** Ethernet MAC (32 bit data bus)  base address */
#define LPC_MAC_BASE            0xFFE00000 /* AHB Peripheral # 0 */

#define LPC_PARTCFG_BASE                0x3FFF8000
/*-------------- Peripheral memory map----------------------------------------*/
/*-- Base addresses  --*/
#define LPC_FLASH_BASE        (0x00000000UL)
#define LPC_RAM_BASE          (0x40000000UL)

#define LPC_AHBRAM0_BASE      (0x7FE00000UL) /*Ethernet RAM (16 kB*/
#define LPC_AHBRAM1_BASE      (0x7FD00000UL)  /* USB RAM (16 kB)*/

#define LPC_APB0_BASE         (0xE0000000UL)
#define LPC_APB1_BASE         LPC_APB0_BASE
#define LPC_AHB_BASE          (0xF0000000UL)
/*-------------- EMC             ---------------------------------------------*/
/** MPMC(EMC) registers, note: all the external memory controller(EMC) registers
are for LPC24xx only. */
#define LPC_STATIC_MEM0_BASE    0x80000000
#define LPC_STATIC_MEM1_BASE    0x81000000
#define LPC_STATIC_MEM2_BASE    0x82000000
#define LPC_STATIC_MEM3_BASE    0x83000000

#define LPC_DYNAMIC_MEM0_BASE   0xA0000000
#define LPC_DYNAMIC_MEM1_BASE   0xB0000000
#define LPC_DYNAMIC_MEM2_BASE   0xC0000000
#define LPC_DYNAMIC_MEM3_BASE   0xD0000000


#define LPC_EMC_BASE    0xFFE08000


/** @} end of group base_addresses_LPC2000 */

#endif  /* _ARCH_ARM_NXP_BASE_ADDRESSES_H_ */